Malfunctions of swan probes. Volkswagen code errors

AvtoAd

19/05/2022
Malfunctions of swan probes. Volkswagen code errors

P0036

The code indicates damage to the power line of the heater of the second oxygen sensor installed in row 1.

 

P0037

Combination 0037 appears when the heating circuit of the second oxygen regulator is shorted to ground.

 

P0050

The combination reports damage to the wiring of the heating device of the first lambda probe installed in the second row.

 

P0130

Fault in the electrical circuit of the first oxygen controller installed in line 1.

 

P0133

Malfunction of the first lambda probe installed in line 1. An error indicates that the response time of the device is too high.

 

P0134

Lack of activity from the first lambda probe installed in row 1. Most likely, the sensor itself is faulty.

 

P0135

Code P0135 appears as a result of a failure in the electrical circuit of the heating element of the first oxygen controller. The lambda probe is installed in the first row of cylinders.

 

P0136

Fault in the electrical circuit of the second oxygen controller installed in the first row.

 

P0139

Low speed signal transmitted from the second lambda probe installed in the first row of cylinders.

 

P0140

No signal from the oxygen sensor №2 installed in the first row.

 

P0141

Code P0141 indicates a failure of the electrical circuit of the heating device of the second oxygen controller located in the first row.

 

P1116

The circuit of the heating system of the first oxygen sensor installed in the first row is broken.

 

P1118

Damage or breakage of the power line of the heater of the second lambda probe installed in the first row.

 

P1176

The control unit determined that the maximum limit of regulation of the lambda corrector installed after the catalyst was reached.

 

P1180

Short circuit to positive output in the linear oxygen regulator circuit.

 

P1185

Short circuit in the power supply of the linear oxygen controller to ground.

 

P2237

Code P2237 reports an open circuit and an inappropriate signal current coming from the first oxygen controller installed in line №1.

 

P2239

Short circuit to the positive terminal in the electrical circuit that supplies the first oxygen controller.

 

P2243

The code indicates a break in the wiring through which the first oxygen controller installed in line 1 is connected.

 

P2251

Break or damage of the "ground" wire of the first oxygen controller installed in line №1.

 

P4096

Fault in the electrical circuit of the first oxygen sensor installed in the second row.

 

P2196

The control unit receives a signal about the enriched combustible mixture coming from the oxygen sensor. This is a device №1, located in the first row.

 

P2626

Malfunction of the linear oxygen sensor installed in the first row. The problem is an incorrect signal coming from the device, so wiring diagnostics are required.

 

00525

Oxygen sensor G39 malfunction.

 

08598

The error can be detected in the form of code 008598. The combination indicates a malfunction of the oxygen controller №1, installed in the first row. Fault can lead to depletion of fuel air.

 

16518

In the absence of activity of the first oxygen sensor installed in line 1.

 

17598

The reference voltage in the supply circuit of the linear oxygen sensor is unreliable.

 

18675

Breakage or damage to the wiring that supplies the first oxygen controller. This is a device installed in row 1. The problem is related to the reference voltage.