Steering errors. Ford error codes

U3000

Failure of the steering wheel control system module.

U3001

Improper shutdown of the control unit. The cause of the problem may be the firmware of the microprocessor module.

B10BD

Multifunction switch malfunction. This is probably a device mounted on the steering wheel. You need to check the connection of the switch to the network.

B1342

Internal failure of the steering unit. First of all, you need to check and clean the contacts on the module connector.

C1099

Failure of the electric motor of the steering system. The motor must be diagnosed and replaced in the event of a breakdown. The reason may be poor drive contact with the network.

C1306

Incorrect determination of the steering angle. The cause of the C1306 problem may be the sensor and control module.

C102D

Mechanical failure of the steering rack. The user must make a visual diagnosis of the node for damage.

U0131

Lack of communication with the microprocessor control unit of the power steering system. In case of error 0131, check the contacts on the module.