Common code errors Opel

000000

If the "000000" symbols appear immediately after the start of the diagnosis, this indicates that there are no problems with the vehicle.

P0050 (00502)

The code indicates a general malfunction of the ABS system. To "treat" the problem, it is necessary to diagnose the control module of the anti-lock braking system.

P0650 065070)

The code for Opel Astra G or Corsa D reports problems with the transmission unit. The combination is deciphered as "damage to the indicator light line". In fact, the fault may be related to the operation of the control unit of the gearbox, but first you need to diagnose all the wires connected to the module.

P0700

Combination 0700 indicates a general malfunction of the transmission. Detailed unit diagnostics are required for more accurate fault information. Check the operation of the box control unit, as well as all wires and sensors connected to it.

P0704

Other format:

• 70405;

070405. The code is related to a malfunction of the cruise control system. You need to check the control unit and diagnose the steering switch to adjust the parameters of the mechanism. It is possible to turn off the contacts on the steering wheel.

P1530

Climate control system malfunction.

P1895

Symbols P1895 indicate a malfunction of the transmission unit. A complete inspection of the box is required, in particular, you need to make sure the integrity of all wires.

P0351;

P0352;

P0353.

Other format:

• 35108;
• 35208;
• 35308.

The code indicates a general malfunction of the ignition system. If this error occurs, check all connectors with cables coming from the shock absorber. Candles, coils and high-voltage wires are also subject to diagnosis.

InSP

This code can be displayed as 1n5p, it appears to remind you of the need for car maintenance.

To reset the caption, follow these steps:

1. Turn on the ignition system;
2. Press and hold the odometer button;
3. In a few seconds the indication of intervals of maintenance should appear on the display with daily run. The button must be pressed and held, and at the same time squeeze the accelerator pedal;
4. Turn the key in the lock to turn on the ignition;
5. The InSp indicator will start blinking on the screen. It should disappear in a few seconds.

P0564

(56471) Literal translation of the error - "malfunction of the interface of the automatic speed control device - a problem with the cruise in the car." The problem should be found in the on / off knob or limit switch.