Audi C6 A6 how to activate and check the cruise control if the throttle and pedal are electronic. Coding and diagnostics of the Audi A6 C5 with the KKL Adapter and VAG COM, VCDS, VAS, VCP, ODIS, etc. Collection of codings VAG Group

AvtoAd

24/05/2022
Audi C6 A6 how to activate and check the cruise control if the throttle and pedal are electronic. Coding and diagnostics of the Audi A6 C5 with the KKL Adapter and VAG COM, VCDS, VAS, VCP, ODIS, etc. Collection of codings VAG Group

 

After setting up a cruise, it must be activated and checked for operability. A diagnostic cord is required for activation.

 

 

To activate cruise control, follow these steps:

 

 

1. Choose the Address of block 01 Engine control module.

 

 

2. Select function 11 Login .

 

 

3. You will be prompted to enter the activation code in a new window. Enter the numbers 11463 and   click "save" .

 

 

4. Switch the ignition off and on, and the letter "G" appears in the unit number.

 

 

 

To check the cruise control, follow these steps.

 

 

Check the functionality of all keys on the pedals:

 

 

1. Choose the Address of block 01 Engine control module.

 

 

2. Select function 08 Measured blocks.

 


3. Select Channel 66 channel and get "Output encoding" .

 

 

4. Next, move the levers to the ON position. There should be changes in line 4: the last two digits (two zeros) should change to "11". Changes should be crossed out in red.

 


5. Now press the "+" on the lever. Another change is to take place: another "0" will become "1".

 

 

Check the performance of all sensors on the clutch and brake pedals:


(Here all changes will take place in the 2nd line).

 


1. Press the clutch pedal. The coding must change - an additional unit will appear.

 

 

2. Press the brakes. The two penultimate digits (two zeros) will change to "11" .

 

 

Done!

 

 

 

Read about Vasya Diagnost's VCDS coding here.