Audi Allroad C5 (4B) how to adapt the air suspension. Coding and diagnostics using the KKL Adapter and VAG COM, VCDS, VAS, VCP, ODIS, etc. Collection of codings VAG Group

AvtoAd

24/05/2022
Audi Allroad C5 (4B) how to adapt the air suspension. Coding and diagnostics using the KKL Adapter and VAG COM, VCDS, VAS, VCP, ODIS, etc. Collection of codings VAG Group

To adapt the air suspension Audi Allroad body C5 (4B) perform the following steps:

 

 


1. Switch on the ignition (the engine must be switched off).

 

 

 

2. Select the Address of block 34 Driving control system.

 

 

 

3. Select function 11 Login.

 

 

 

4. Enter the code 31564 , confirm.

 

 


5. Select function 10 Adaptations.

 

 

Important: as soon as we open the "Adaptation" window, there is no way back, the operation MUST be completed, otherwise there will be errors in the control unit of the suspension.

 

 


6. We go to Channel 01.

 

 

7. click "Read" . Wait until the car moves to the upper position of the suspension. We will see the value of 402 - this is the distance in mm from the center of the wheel (hub) to the arch.

 

 


8. Measure the real distance of the front left wheel with a tape measure. Enter the value that came out. We save.

 

 

Important: Channel 02 is the right front wheel, Channel 03 is the left rear wheel, Channel 04 is the right rear wheel.

 

 


9. Open Channel 05 and save the value "01" so that the data from the previous channels is saved.

 


Thus, the suspension can be artificially underestimated or change the balance ..