Audi A6 C6 how to enable graphics parktronic on MMI. Coding and diagnostics using the KKL Adapter and VAG COM, VCDS, VAS, VCP, ODIS, etc. Collection of codings VAG Group

To turn on the graphics parktronic on the MMI, follow these steps:

1. Look at the number of the unit installed in the car. It is located on the right behind the trim in the trunk (the trim can not be changed).

2. Block number 4F0 910 283 . Pay attention to the letter at the end: If we have C , E or H , then everything is normal, so go to point 3. If A - replace the block with H. So, buy a unit (state-of-the-art H ) and install a new one.

3. Make changes to VAG:

• Connect VAG;

• Choose the Address of block 76 Parking assistants;

• Choose "Coding" ;

• Change the second digit to 2 (0? Xxxxx);

• Press "Do it!" .

Done!

Read about Vasya Diagnost's VCDS coding here.