Audi A6 C6 how to adapt the headlights. Coding and diagnostics using the KKL Adapter and VAG COM, VCDS, VAS, VCP, ODIS, etc. Collection of codings VAG Group

If a headlight corrector error occurs while diagnosing the vehicle, they must be adjusted.

 

 

To adapt the headlights, follow these steps:

 

 

1. Connect VCDS.

 

2. Turn on the inflammation.

 

3. Choose the address of block 55 Headlight adjustment.

 

4. Select function 02 Error reading.

 

 

5. Delete errors, go to the previous menu.

 

6. Turn on the low beam.

 

7. Select function 03 Initial tests.

 

 

8. Press start, and when the headlights are lowered, press start again. The headlights will rise and after a while return to the starting position (check the serviceability of the mechanisms). Go to the previous menu.

 

9. Check the car alternately on all four wheels several times for accurate installation of sensors.

 

10. Select function 04 Basic settings.

 

 

11. In the group, enter "001" and wait until the headlights are adjusted and while the information in the program window is updated.

 

12. Adjust the beam of headlights (two twisters: closer to the center - up / down, to the edges - right / left).

 

13. Enter "002" , and the installation of the headlights will be remembered by default, and the error will be removed. Go to the previous menu.

 

12. Check errors 02 again and delete them, if any.

 

The adaptation is done, we leave the program!

 

 

 

Read about Vasya Diagnost's VCDS coding here.