Audi A6 C6 how to adapt climate control. Coding and diagnostics using the KKL Adapter and VAG COM, VCDS, VAS, VCP, ODIS, etc. Collection of codings VAG Group

Important: the procedure is performed in a heated, not started car.

To adapt climate control, we perform the following actions:

1. Connect the VAG-Com adapter.

2. Select the Address of the unit 08 Auxiliary air heater.

3. Select function 02 Fault codes.

4. Erase all errors.

5. Select function 04 Basic settings.

6. Start the group 000. After starting the group, the numbers will start to change their values (in the range from 0 to 255). At the end of the procedure - the value of all numbers will be zero.

7. Again, scan for errors and erase everything that can be erased.

8. After the procedure, eliminate inflammation and wait 10-15 seconds.

9. Then turn on the inflammation.

10. Click "OK" .

Done!

Read about Vasya Diagnost's VCDS coding here.