Audi A6 C5 how to adapt the throttle. Coding and diagnostics using the KKL Adapter and VAG COM, VCDS, VAS, VCP, ODIS, etc. Collection of codings VAG Group

AvtoAd

23/05/2022
Audi A6 C5 how to adapt the throttle. Coding and diagnostics using the KKL Adapter and VAG COM, VCDS, VAS, VCP, ODIS, etc. Collection of codings VAG Group

The throttle adaptation procedure can be performed in the engine control unit.

We do this in order to re-teach the unit, where there is a really closed position of the valve, and where open. Over time, due to dirt, this range will change slightly. To restore it, we will adapt. By the way, not all engines support throttle adaptation, but most do.

 

To adapt the throttle, perform the following steps:

 

 

1. Choose the Address of block 01 Engine control.

 

2. Select function 04 Basic settings.

 


3. Manually enter Channel 60 and press "Start" .

 

If there is an "on / off" button a little higher on the right, you need to press it. If it says "Error", then the channel is the 98th. If there is an "Error" here and there, it means that the motor does not support this function, and the damper automatically adapts each time you start.

 

Done!

 

 

 

Read about Vasya Diagnost's VCDS coding here.